How to make a roller for applying textured plaster

A metal holder for a roller with a rotating cylinder needs to be bought in the store, but for him you can make a coat that allows you to create an exclusive pattern.

Features of the materials used for the manufacture of coats


Roller for decorative plaster can be with fur coat. In this case, the pattern of the plastered surface will be a chaotic intersection of small embossed lines. Fur coat with a short nap will get a smoother wall. This plastering method is good for drywall. To obtain a decorative layer on the brick and concrete walls, rollers are used, the fur coat of which is made of fur with thick elastic fibers, which gives a more embossed pattern.
Roller for decorative plaster can be made of elastic rubber, which made holes of various shapes and sizes.You can cut stars, geometric shapes, patterns of thin strips. The thickness of the rubber will determine the height of the edges of the relief layer: the thinner the material of which the coat is made, the finer the decoration will be.

How to make a roller for decorative plaster


The easiest way to make plaster relief is to use a roller with a rigid cylinder, on which a rope or a flexible wire is wound. It is not necessary to do uniform, correctly laid coils: the more chaotic they are, the more intricate the pattern will be.
To get a pattern that resembles a natural stone finish, you need to attach “ears” to the roller cylinder. They can be made of durable elastic material: rubber strips, insulating wire coating, durable twine, pieces of leather. If you want to get the texture of a small stone, you will need to make 5-8 "ears". If you need a finish under a large natural stone, enough 3-4 loops. "Ears" attached to the base of the cylinder with a moisture-resistant glue. You can use "Titan", "Moment", "Superglue". The location of the loops is recommended to be noted in any available way, as this will help to attach the detached “eyelet” and not to change the wall pattern.
To obtain a longitudinal texture, you will need a roller with strips protruding above the surface of the cylinder. They can be made of leather braids, rope, rubber. Any of these materials should be glued to the plastic of the cylinder. For a simple pattern, a pressed fabric can be used, which is wrapped around the roller and fixed with glue or thin metal wire.


Related News


Coffee-based body mask
Kanye West fought off Kim Kardashian from her ex-husband
How to take care of the pool in the country
How to help pets survive the heat
How to marinate oyster mushrooms for the winter at home
How to become a good mom: 7 real tips
Feet stink what to do