How to Connect iball Claro CTV27 TV Tuner Card (Installation/Setup)
How to Connect an External TV Tuner Card to a Desktop
Open up the box packing the TV tuner card, its remote and a few cables.
Plug out the speaker jack from your sound-card (which is usually located at the back of the CPU cabinet).
Insert the cable(which has a similar jack like your speaker's jack that was plugged into the sound card) that came along with the packaging in the place of the speaker jack into your sound card.
The other end of this cable should be plugged into the "Sound-out" socket of the TV tuner card.
The speaker jack should be plugged into the "Sound-In" socket of the TV tuner card.
Plug out the monitor display cable from the back of the CPU cabinet and plug it into the TV tuner card.The socket on the card looks similar to the one on the CPU cabinet.
Now, take the other cable that had come bundled with the tuner card and plug one of its end into the monitor socket on the CPU cabinet.(The plug looks similar to the plug on your monitor cable).
Plug the other end of this cable into the "VGA-Out" socket of the tuner card.
Take the power adapter that came bundled with the card and plug it into a power source.
The output cable of the power adapter needs to be plugged into the "Power-In" socket of the tuner card.
Insert the terrestrial antenna jack into the antenna socket of the card.
Switch on the entire setup.(In some cases, you could hear a beeping sound from the speakers).
Use the remote control bundled with the card and make sure it has proper batteries in it.
Press the power button and the desktop monitor should show some display resembling a disturbed TV transmission.
Treat the setup like a regular TV and tune the channels.
Turn the TV off, and you can continue working on your desktop normally.
QuestionHow many channels will be available?wikiHow ContributorCommunity AnswerThis depends on how you get your signal. This will usually not work with a cable connection as the channels are encoded. If you use an antenna, go to tvfool.com or antennaweb.org to check which channels are in your exact location. Then (and only then), see what kind of antenna would reach that far. The general rule is the farther away the signal is, the farther from the ground you should get.Thanks!
QuestionI don't have a CPU. Can I tune the TV with only a monitor?wikiHow ContributorCommunity AnswerNo, a desktop has to have a CPU unless it's on an Apple TV. If its a PCU, put it in the USB plugholes. If it's on the Apple computer, behind the screen are the holes where you can plug a USB.Thanks!
QuestionHow many signals can connect on my laptop?wikiHow ContributorCommunity AnswerAs many as your laptop can use. You can go to your laptop's manufacturing website (like Apple.com for Mac users) and check your laptop's specifications.Thanks!
QuestionHow do I connect a set top box to an LED monitor with an HDMI cable?wikiHow ContributorCommunity AnswerIt depends if your monitor has a HDMI input. If it doesn't, then you could get an adapter.Thanks!
QuestionCan I use a monitor to DTH through VGA to an RCA cable?wikiHow ContributorCommunity AnswerNo, it won't work. You will need a TV tuner for that. I'm currently using a external tuner to watch TS SD on my monitor.Thanks!
How can I connect two TVs to one set up box and still be able to watch different things on each of them?
My Intex Sky-Pro LCD TV Tuner, IT-195FM, does not have a port that I can connect a speaker to. Is there another way to do this?
How do I connect an external TV box to my LCD monitor?
I have tried to connect my combo unit with my laptop but my laptop's monitor doesn't bring the TV screen
What are the general specifications of the power adapter for any TV tuner card? (External)
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
- The TV tuner card can also be run without switching on your desktop. Just the monitor needs to be powered on. In face, you do not need a CPU cabinet at all, just a monitor is enough.
- The connection to the CPU cabinet is made to enable you to use the monitor for your Desktop PC when you are not using the TV. The TV connection to the CPU cabinet is made to enable you to use the monitor for you desktop PC when you are not using the TV.
- Some of the tuner cards have an automatic tuning facility which can be invoked by pressing a single key from the remote.
- If initially, you do not hear any sound, try swapping the sockets of the two audio cables plugged into the tuner card.
- The TV tuner card can also be run without switching on your desktop. Just the monitor needs to be powered on. In fact, you do not need a CPU cabinet at all, just a monitor is enough!
- If initially you do not hear any sound, try swapping the sockets of the two audio cables plugged into the tuner cards.
- The connection to the CPU cabinet is made to enable you to use the monitor for your desktop PC when you are not using the TV.
Video: How to connect TV tuner | golu singh
If You’re Constantly Breaking Out, These Foods Could Be toBlame
Ranked: life expectancy, healthiest states in America
How to Use Rose Water for Beautiful Skin
Morning Workout: A 12-Minute Bodyweight Routine to Feel Energized
How to watch porn (ethically)
Handling COPD Exacerbations: What Caregivers Should Know
3 Ways to Be a Bro
This chart shows how much higher the federal minimum wage should be
5 Sure Signs Youre About to Get Dumped
Nicole Miller Launches New Signature Fragrance, Wants Anything ButConventional
How to Be Proud to Be Black
Potato, Apple, and Gruyere Tart
The Complete Guide to Sport Supplements
Date: 10.12.2018, 17:04 / Views: 41261